10 Upton Drive, Wilmington, MA 01887
Toll Free 800-657-7704
Architectural Laboratory Water Treatment Marine Air Handling

polycarbonate machining

Explanation of Relevant Service Information

Airbus has issued Service Bulletin A320-25-1248, dated February 16,
2001, which describes procedures for modifying the shelf (floor panel)
above the Litton ADIRUs by installing shims on the webs of the shelf
support structure in the avionics rack. In addition, for certain
airplanes, the service bulletin includes procedures for modifying the
polycarbonate guard which covers the ADIRUs, and machining the ladder located in the
avionics compartment to increase the depth of the slot at the foot of
the ladder, as applicable. Accomplishment of the actions specified in
the service bulletin is intended to adequately address the identified
unsafe condition. The DGAC classified this service bulletin as
mandatory and issued French airworthiness directive 2002-125(B), dated
March 6, 2002, to ensure the continued airworthiness of these airplanes
in France.

Polycarbonate MachiningPlease Contact Us to discuss your polycarbonate machining needs. You design it, we build it.

polycarbonate machining

techniques | fittings
home | contact | sitemap | privacy | about | glossary cnc router, graduated cylinder, polypropylene, fume hood, plastic fabrication, rectangular tank, fretwork, pvc duct, plastic water tank, laminar flow hood, plastic machining, marine fish tank, plastic water storage tank, cylinder graduated reading, marine holding tank, acrylic fabrication, marine tank, graduated cylinder definition, polypropylene tank, plastic cone, cnc plastic router, petg plastic
cnc router | plastic fabrication | acrylic | manufacturing | water & air treatment | resources| web design